Reasonably Good Mangler Drill Template

Fuzz Dog · 1590B

Reasonably Good Mangler drill template: 1590B 4-Knob (Type 2) layout in a Hammond 1590B enclosure

Template details

Circuit
Reasonably Good Mangler
Vendor
Fuzz Dog
Enclosure
Hammond 1590B
Dimensions
59.3 × 111.2 × 27 mm
Layout
1590B 4-Knob (Type 2)
Category
Guitar effect

Export formats

  • PDF: print at 1:1 scale
  • SVG: vector graphic
Open in editor →

About this drill template

Drill template for the Fuzz Dog Reasonably Good Mangler, sized for a Hammond 1590B enclosure (59.3 × 111.2 × 27 mm). The pre-positioned holes match the PCB's pot footprint exactly, with the footswitch centred below the 4-knob layout. Print at 1:1 scale, tape to the enclosure face, centre-punch, and drill. PCB and parts not included.

Fuzz Dog description: “Because sometimes it's about ripping your tone apart and getting crazy.”

The Great Destroyer. Stock is four knobs, with an optional fifth Tweak pot replacing the fixed 22K resistor of the original.

Vendor build documentation →

View on Fuzz Dog →

Build notes

Four-knob layouts are dense but manageable: the pots are spaced wide enough to grab individually, with the footswitch centred below.

The Hammond 1590B is the standard small DIY pedal enclosure: compact enough for a crowded board, large enough for most single-effect PCBs and a 9V battery.

Vendor specs: PCB 50 x 40mm, build difficulty medium.

Drill measurements

Hole centres for the 1590B 4-Knob (Type 2) layout. X runs left to right from the centre of the face being drilled. On the enclosure face, Y is measured from the centre, positive towards the top. For holes on a side, Y is the distance down the wall, measured from the face edge. Export the PDF for a 1:1 printable version with a scale check.

HoleFaceX (mm)Y (mm)Diameter
PotEnclosure face-17.5427 mm (0.28 in)
PotEnclosure face17.5427 mm (0.28 in)
PotEnclosure face-17.5157 mm (0.28 in)
PotEnclosure face17.5157 mm (0.28 in)
LEDEnclosure face-14-37.65 mm (0.20 in)
FootswitchEnclosure face0-37.612 mm (0.47 in)
DC JackRight side-37.613.612 mm (0.47 in)
JackRight side-17.613.69.5 mm (0.37 in)
JackLeft side-17.613.69.5 mm (0.37 in)

Need a different layout?

Create your own drill template from scratch. It's free and takes just a few minutes.

Start designing free →