Baxandall Tone Stack Drill Template

Fuzz Dog · 1590B

Baxandall Tone Stack drill template: 1590B 2-Knob (Type 1) layout in a Hammond 1590B enclosure

Template details

Circuit
Baxandall Tone Stack
Vendor
Fuzz Dog
Enclosure
Hammond 1590B
Dimensions
59.3 × 111.2 × 27 mm
Layout
1590B 2-Knob (Type 1)
Category
Guitar effect

Export formats

  • PDF: print at 1:1 scale
  • SVG: vector graphic
Open in editor →

About this drill template

Drill template for the Fuzz Dog Baxandall Tone Stack, sized for a Hammond 1590B enclosure (59.3 × 111.2 × 27 mm). The pre-positioned holes match the PCB's pot footprint exactly, with the footswitch centred below the 2-knob layout. Print at 1:1 scale, tape to the enclosure face, centre-punch, and drill. PCB and parts not included.

Fuzz Dog description: “Utility board to add a Baxandall (OK, James) tone stack to another circuit.”

Not an effect on its own: a utility board carrying a Baxandall tone stack, strictly a James stack, to add bass and treble controls to another circuit. Two knobs and nothing else.

Vendor build documentation →

View on Fuzz Dog →

Build notes

Two-knob builds are usually the cleanest internally: minimal pot wiring, easy to keep the signal path short.

The Hammond 1590B is the standard small DIY pedal enclosure: compact enough for a crowded board, large enough for most single-effect PCBs and a 9V battery.

Vendor specs: PCB 50 x 18mm, build difficulty medium.

Drill measurements

Hole centres for the 1590B 2-Knob (Type 1) layout. X runs left to right from the centre of the face being drilled. On the enclosure face, Y is measured from the centre, positive towards the top. For holes on a side, Y is the distance down the wall, measured from the face edge. Export the PDF for a 1:1 printable version with a scale check.

HoleFaceX (mm)Y (mm)Diameter
PotEnclosure face-16427 mm (0.28 in)
PotEnclosure face16427 mm (0.28 in)
LEDEnclosure face-14-37.65 mm (0.20 in)
FootswitchEnclosure face0-37.612 mm (0.47 in)
DC JackRight side-37.613.612 mm (0.47 in)
JackRight side-17.613.69.5 mm (0.37 in)
JackLeft side-17.613.69.5 mm (0.37 in)

Need a different layout?

Create your own drill template from scratch. It's free and takes just a few minutes.

Start designing free →