Muffled Gun Fuzz Drill Template
Fuzz Dog · 1590B
Template details
- Circuit
- Muffled Gun Fuzz
- Vendor
- Fuzz Dog
- Enclosure
- Hammond 1590B
- Dimensions
- 59.3 × 111.2 × 27 mm
- Layout
- 1590B 6-Knob (Type 1)
- Category
- Fuzz
Export formats
- PDF: print at 1:1 scale
- SVG: vector graphic
About this drill template
Drill template for the Fuzz Dog Muffled Gun Fuzz, sized for a Hammond 1590B enclosure (59.3 × 111.2 × 27 mm). The pre-positioned holes match the PCB's pot footprint exactly, with the footswitch centred below the 6-knob layout. Print at 1:1 scale, tape to the enclosure face, centre-punch, and drill. PCB and parts not included.
Fuzz Dog description: “Some people prefer simplicity - less is more. Some like to tweak their knobs all night - this one's for you...”
The Musket, for people who would rather have six controls than three. Fuzz Dog note that knobs need to be 15mm across or less, since six on this spacing is a tight fit.
Build notes
Six-knob layouts are about as much as a single-row enclosure comfortably fits: modulation depth, multi-band EQ, multi-stage compression all live here.
The Hammond 1590B is the standard small DIY pedal enclosure: compact enough for a crowded board, large enough for most single-effect PCBs and a 9V battery.
Vendor specs: PCB 50 x 50mm, build difficulty medium.
Drill measurements
Hole centres for the 1590B 6-Knob (Type 1) layout. X runs left to right from the centre of the face being drilled. On the enclosure face, Y is measured from the centre, positive towards the top. For holes on a side, Y is the distance down the wall, measured from the face edge. Export the PDF for a 1:1 printable version with a scale check.
| Hole | Face | X (mm) | Y (mm) | Diameter |
|---|---|---|---|---|
| Pot | Enclosure face | -17.5 | 42 | 7 mm (0.28 in) |
| Pot | Enclosure face | 0 | 42 | 7 mm (0.28 in) |
| Pot | Enclosure face | 17.5 | 42 | 7 mm (0.28 in) |
| Pot | Enclosure face | -17.5 | 15 | 7 mm (0.28 in) |
| Pot | Enclosure face | 0 | 15 | 7 mm (0.28 in) |
| Pot | Enclosure face | 17.5 | 15 | 7 mm (0.28 in) |
| LED | Enclosure face | -14 | -37.6 | 5 mm (0.20 in) |
| Footswitch | Enclosure face | 0 | -37.6 | 12 mm (0.47 in) |
| DC Jack | Right side | -37.6 | 13.6 | 12 mm (0.47 in) |
| Jack | Right side | -17.6 | 13.6 | 9.5 mm (0.37 in) |
| Jack | Left side | -17.6 | 13.6 | 9.5 mm (0.37 in) |