1590B 4-Knob 2-Toggle (Type 2) Drill Template
Fuzz Dog · 1590B · used by 1 circuit
Template details
- Layout
- 1590B 4-Knob 2-Toggle (Type 2)
- Vendor
- Fuzz Dog
- Enclosure
- Hammond 1590B
- Dimensions
- 59.3 × 111.2 × 27 mm
- Used by
- 1 circuit
Export formats
- PDF: print at 1:1 scale
- SVG: vector graphic
About this layout
The 1590B 4-Knob 2-Toggle (Type 2) template positions 11 holes (59.3 × 111.2 × 27 mm): 4 × Pot, 2 × Toggle, LED, Footswitch on the enclosure face; DC Jack, Jack on the right side; Jack on the left side. Every circuit listed below shares these hole positions, so one printed template covers any of them. Print the PDF at 1:1 scale, tape it to the enclosure, centre-punch, and drill.
Drill measurements
Hole centres for the 1590B 4-Knob 2-Toggle (Type 2) layout. X runs left to right from the centre of the face being drilled. On the enclosure face, Y is measured from the centre, positive towards the top. For holes on a side, Y is the distance down the wall, measured from the face edge. Export the PDF for a 1:1 printable version with a scale check.
| Hole | Face | X (mm) | Y (mm) | Diameter |
|---|---|---|---|---|
| Pot | Enclosure face | -17.5 | 42 | 7 mm (0.28 in) |
| Pot | Enclosure face | 17.5 | 42 | 7 mm (0.28 in) |
| Toggle | Enclosure face | 0 | 28.5 | 6 mm (0.24 in) |
| Pot | Enclosure face | -17.5 | 15 | 7 mm (0.28 in) |
| Toggle | Enclosure face | 0 | 15 | 6 mm (0.24 in) |
| Pot | Enclosure face | 17.5 | 15 | 7 mm (0.28 in) |
| LED | Enclosure face | -14 | -37.6 | 5 mm (0.20 in) |
| Footswitch | Enclosure face | 0 | -37.6 | 12 mm (0.47 in) |
| DC Jack | Right side | -37.6 | 13.6 | 12 mm (0.47 in) |
| Jack | Right side | -17.6 | 13.6 | 9.5 mm (0.37 in) |
| Jack | Left side | -17.6 | 13.6 | 9.5 mm (0.37 in) |