HUGE Fuzz Drill Template
Fuzz Dog · 1590B
Template details
- Circuit
- HUGE Fuzz
- Vendor
- Fuzz Dog
- Enclosure
- Hammond 1590B
- Dimensions
- 59.3 × 111.2 × 27 mm
- Layout
- 1590B 1-Knob (Type 1)
- Category
- Fuzz
Export formats
- PDF: print at 1:1 scale
- SVG: vector graphic
About this drill template
Drill template for the Fuzz Dog HUGE Fuzz, sized for a Hammond 1590B enclosure (59.3 × 111.2 × 27 mm). The pre-positioned holes match the PCB's pot footprint exactly, with the footswitch centred below the 1-knob layout. Print at 1:1 scale, tape to the enclosure face, centre-punch, and drill. PCB and parts not included.
Fuzz Dog description: “Seems like everyone has their own take on the classic Colorsound One-Knob Fuzz, and why not?”
The Massif, one of many takes on the Colorsound One Knob Fuzz. Like the Electra, the design is simple enough that small part changes move it a long way, so it rewards experimenting.
Build notes
The Hammond 1590B is the standard small DIY pedal enclosure: compact enough for a crowded board, large enough for most single-effect PCBs and a 9V battery.
Vendor specs: PCB 25 x 30mm, build difficulty easy.
Drill measurements
Hole centres for the 1590B 1-Knob (Type 1) layout. X runs left to right from the centre of the face being drilled. On the enclosure face, Y is measured from the centre, positive towards the top. For holes on a side, Y is the distance down the wall, measured from the face edge. Export the PDF for a 1:1 printable version with a scale check.
| Hole | Face | X (mm) | Y (mm) | Diameter |
|---|---|---|---|---|
| Pot | Enclosure face | 0 | 34 | 7 mm (0.28 in) |
| LED | Enclosure face | -14 | -37.6 | 5 mm (0.20 in) |
| Footswitch | Enclosure face | 0 | -37.6 | 12 mm (0.47 in) |
| DC Jack | Right side | -37.6 | 13.6 | 12 mm (0.47 in) |
| Jack | Right side | -17.6 | 13.6 | 9.5 mm (0.37 in) |
| Jack | Left side | -17.6 | 13.6 | 9.5 mm (0.37 in) |