125B 3-Knob 1-Toggle (L) w/ Battery Drill Template
Aion FX · 125B · used by 4 circuits
Template details
- Layout
- 125B 3-Knob 1-Toggle (L) w/ Battery
- Vendor
- Aion FX
- Enclosure
- Hammond 125B
- Dimensions
- 63.7 × 119.4 × 35.8 mm
- Used by
- 4 circuits
Export formats
- PDF: print at 1:1 scale
- SVG: vector graphic
About this layout
The 125B 3-Knob 1-Toggle (L) w/ Battery template positions 9 holes (63.7 × 119.4 × 35.8 mm): 3 × Pot, Toggle, LED bezel, Footswitch on the enclosure face; 2 × Jack, DC Jack on the top side. Every circuit listed below shares these hole positions, so one printed template covers any of them. Print the PDF at 1:1 scale, tape it to the enclosure, centre-punch, and drill.
Drill measurements
Hole centres for the 125B 3-Knob 1-Toggle (L) w/ Battery layout. X runs left to right from the centre of the face being drilled. On the enclosure face, Y is measured from the centre, positive towards the top. For holes on a side, Y is the distance down the wall, measured from the face edge. Export the PDF for a 1:1 printable version with a scale check.
| Hole | Face | X (mm) | Y (mm) | Diameter |
|---|---|---|---|---|
| Pot | Enclosure face | -16.4 | 43.5 | 7 mm (0.28 in) |
| Pot | Enclosure face | 16.5 | 43.5 | 7 mm (0.28 in) |
| Toggle | Enclosure face | -21.6 | 16.8 | 6 mm (0.24 in) |
| Pot | Enclosure face | 0 | 16.8 | 7 mm (0.28 in) |
| LED bezel | Enclosure face | -19.7 | -30.5 | 8 mm (0.31 in) |
| Footswitch | Enclosure face | 0 | -30.5 | 12 mm (0.47 in) |
| Jack | Top side | -16 | 24.8 | 9.5 mm (0.37 in) |
| DC Jack | Top side | 0 | 24.8 | 12 mm (0.47 in) |
| Jack | Top side | 16.1 | 24.8 | 9.5 mm (0.37 in) |